spring energized sea should only be installed in an open trench.
For concentric and stress-free installation, follow these steps:
1. Put the seal into the open groove;
2. With cover, do not tighten first;
3. Install shaft;
4. Secure the cover to the body
spring energized seal Features:
1. The sealing performance is not affected by insufficient lubrication when starting;
2. Effectively reduce wear and friction resistance;
3. Through the combination of different sealing materials and springs, different sealing forces can be displayed to meet various application needs. Made of special CNC machining machine, no mold cost - especially suitable for a small number of various seals;
4. Chemical corrosion resistance and heat resistance are far better than commonly used sealing rubber, dimensional stability, and no deterioration of sealing performance derived from volume swelling or contraction;
5. Compact structure, can be installed in the standard O-ring groove;
6. Greatly improve the sealing capacity and service life;
7. The seal groove can be filled with any anti-pollution material (such as silicone) - but not suitable for radiation environment;
8. Because the sealing material is Teflon, it is very clean, will not pollute the process friction coefficient is very low, even at very low speed application is also very smooth, there is no "lag effect";
9. Small starting friction resistance, even if the downtime is long or intermittent operation, can maintain low starting power performance.