Rubber sealing ring installation precautions

Rubber sealing ring plays an important sealing role in various mechanical equipment. Proper installation of rubber seals ensures effective sealing performance and long service life. This information will explain the precautions during the installation of rubber seals.


First. check the sealing ring


Before installation, the rubber sealing ring should be checked to ensure that it has no damage, cracks, bubbles and other quality problems. At the same time, the size of the sealing ring should be checked to ensure that it can be closely fitted with the sealing surface.


Second. Clean the sealing surface


During the installation process, ensure the cleanliness of the sealing surface. If there are impurities, burrs or oil, etc., should be cleaned. After cleaning, the sealing surface should be dry and free of foreign matter to ensure that the rubber sealing ring can be tightly fitted.


Third. the correct installation method


1. Insertion method: Insert the rubber sealing ring into the sealing slot to ensure that it is installed in place. Then, apply an appropriate amount of lubricant to the surface of the seal to reduce friction and wear.


2. Pressing method: Place the rubber sealing ring on the sealing surface, and then apply uniform pressure with the press to make it closely fit on the sealing surface.


3. Assembly method: The rubber sealing ring and metal parts are assembled together, generally using interference fit. When assembling, it should be ensured that the sealing ring is evenly stressed to avoid distortion or uneven stress resulting in reduced sealing performance.


Fourth. Avoid excessive compression or stretching


Excessive compression or stretching of the rubber seal should be avoided during installation. Excessive compression may lead to the deformation of the sealing ring, affecting its resilience and sealing performance; Excessive stretching may cause the sealing ring to lose elasticity and cannot be tightly fitted to the sealing surface.


Fifth. pay attention to the working temperature and pressure range


In the process of use, attention should be paid to the working temperature and pressure range of the rubber seal. Excessive temperature or pressure can cause damage or failure of the seal. Therefore, the performance characteristics of the rubber material used should be understood before use to ensure that it works stably under working conditions.


Sixth. Regular maintenance and replacement


In order to ensure the normal use of rubber seals and extend their service life, regular maintenance and replacement should be carried out. For conditions with frequent contact with oil or chemical substances, the replacement frequency should be appropriately increased. At the same time, when the sealing ring is found to be worn or aging, it should be replaced in time to avoid the risk of leakage or failure.


In short, the correct installation method and precautions are crucial to the performance and service life of rubber seals. Understanding and complying with the relevant precautions can ensure its effective sealing performance and long service life, thus guaranteeing the stable operation of the equipment.


If you have other questions, please visit the Forever Seals official website for consultation


Chat with us