The sealing ring with a rough edge will have many effects on the use, mainly including the following aspects:
1. Affect the sealing effect:
The presence of rough edges may change the size and shape of the sealing ring, which in turn affects its sealing performance. Especially in situations where strict sealing is required, such as high pressure, high temperature or corrosive environments, rough edges can lead to seal failure, resulting in leakage.
For types such as O-ring seals, if the raw edge is improperly positioned (such as in front of the sliding direction), it may turn up and be in the sealing position, which directly affects the sealing effect.
2. Increase production cost:
In the production process, in order to remove the raw edge on the seal ring, it may be necessary to add additional trimming procedures, which not only increases the consumption of manpower and space, but also may extend the production cycle, thereby increasing the production cost.
At the same time, the presence of raw edges may also cause the sealing ring to be damaged more easily during the assembly process, thereby increasing the scrap rate and production costs.
3. Reduce product quality and commercial value:
The raw edge on the sealing ring will directly affect its appearance quality and reduce the overall beauty of the product.
In the market competition, the appearance quality of products is often one of the important factors for consumers to consider. Therefore, the presence of raw edges may reduce the commercial value of the seal and the product in which it is located.
4. There are security risks:
In some specific occasions (such as food packaging, medical equipment, etc.), the presence of raw edges may pose a safety hazard. For example, in food packaging, raw edges may become a source of foreign matter, posing a threat to food safety.
In situations where high cleanliness is required, such as medical devices, raw edges may also affect the normal operation and safety of the equipment.
The sealing ring with rough edge will cause many adverse effects on the use of. Therefore, the quality of the sealing ring should be strictly controlled in the production process to ensure that there are no defects such as burrs, in order to ensure the sealing performance of the product, production costs, product quality and commercial value and safety of use.